BFNTZ - CAMCO QUIK STAIN/CAMCO QUIK STAIN II
- MSDS: BFNTZ
- Manufacturer: CAMBRIDGE CHEMICAL PRODUCTS INC
- Product Name: CAMCO QUIK STAIN/CAMCO QUIK STAIN II
- National Stock Number: 6505-00-764-4729
Product Identification
Product ID:CAMCO QUIK STAIN/CAMCO QUIK STAIN II
MSDS Date:02/16/1987
FSC:6505
NIIN:00-764-4729
MSDS Number: BFNTZ
Responsible Party
FORT LAUDERDALE, FL 33309
US
Emergency Phone: 305 971 4040
Info Phone: 305-971-4040
Preparer: TOM MAUTHNER
Cage: 1AD19
Contractor
Cage: 1AD19
Ingredients
METHYL ALCOHOL (METHANOL) (SARA III)
CAS: 67-56-1
RTECS: PC1400000
Fraction By Weight: 85-90%
OSHA PEL S,200PPM/250STEL
ACGIH TLV: S,200PPM/250STEL; 93
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
WRIGHT STAIN
Fraction By Weight: 0.3-0.4%
ACGIH TLV: NOT SPECIFIED
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:NONE GIVEN.
Effects of Overexposure:INHAL-PROLONGED
OVEREXPOS-DIZZ,HEADACHE,NARCOTIC EFFECT. SKIN-EXCESS
DRYNESS,DERMATITIS. EYES-CORNEAL DAMAGE. INGEST-MAY BE FATAL,CAUSES
BLINDNESS & RENAL DISFUNCTION.
Medical Cond Aggravated by Exposure:ASTHMA,EMPHYSEMA.
First Aid
First Aid:INHAL-GET TO FRESH AIR. SKIN-WASH W/SOAP & WATER;APPLY
EMOLLIENT CREAM. EYES-IRRIGATE W/WATER 15 MIN,GET MED ATTN.
INGEST-GET IMMED MED ATTN.
Fire Fighting
Flash Point Method:TCC
Flash Point:54F/12.2C (C.C)
Lower Limits:6.0
Upper Limits:36.5
Extinguishing Media:CARBON DIOXIDE,DRY CHEM,FOAM.
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:NONE NOTED BY THE MFR.
Accidental Release
Spill Release Procedures:ABSORB W/SUITABLE COMMERCIAL ABSORBENT. IF
ABSORB NOT AVAILABLE OR POSS FIRE RISK,WASH DIRECTLY TO SEWER
W/COLD AREA. CLEAN AREA WELL.
Handling
Handling and Storage Precautions:STORE AT ROOM TEM (50F-90F) IN CLOSED
CONTNRS AWAY FM ANY SOURCE OF HEAT OR OPEN FLAME. DO NOT USE NEAR
OPEN FLAME.
Other Precautions:AVOID BODILY CONTACT. REMOVE CONTAM CLOTHING &
WASH;TREAT AFFECTED AREAS OF THE BODY.
Exposure Controls
Respiratory Protection:NIOSH APPROVED DISPOSABLE DUST & MIST
RESPIRATORS.
Ventilation:LOCAL EXHAUST-MINIMUM RATE SHOULD BT ACCEPTABLE.
Protective Gloves:THIN POLYETHYLENE.
Eye Protection:GOGGLES
Other Protective Equipment:LAB COAT. EYEWASH SHOULD BE AVAILABLE AT
WORKPLACE.
Work Hygienic Practices:DO NOT CONTAM FOODSTUFF W/PRODUCT.
Supplemental Safety and Health
MSDS UNDATED
Chemical Properties
HCC:F2
Boiling Pt:=63.9C, 147.F
Vapor Pres:96
Spec Gravity:0.83
pH:7.0
Evaporation Rate & Reference:3.5 (N-B.ACET=1)
Solubility in Water:VERY GOOD
Appearance and Odor:DARK GLUE,LOW VISCOSITY LIQ;METHYL ALCOHOL ODOR.
Percent Volatiles by Volume:88
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:HEAT & MOISTURE.
Hazardous Decomposition Products:NONE EXPECTED.
Disposal
Waste Disposal Methods:OBSOLETE MATL MAY BE INCINERATED OR RETURNED TO
MANUFACTURER.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.